STEP 1 The meter is located in each home where the water line enters the house and where the inside main shut off is located. The endpoint which sends out the signal that calculates the monthly water usage will usually be located close to the meter,some endpoints are far away but attached with a wire, very few are located outside of the home. The meter and endpoint is the property of the district; all other plumbing is the responsibility of the homeowner.
STEP 2 Keep in mind that you might be checking your meter on a date different from the one used for billing. This could result in a difference in the amount you find, compared with the amount on which your bill is based. However, if your reading is considerably higher than what is on your bill, check for a leak or try to determine the source of large water use. If your reading is significantly lower than the reading on your bill, please contact us and let us assist you in determining the problem.